IEC 62133 Battery Test Temperature Humidity Test Chamber

• Customization: Available
• After-sales Service: Good
• Warranty: 1 Year
• Model NO.: BND-BHLT
• Type: All Types of Batteries
• Test Region: Temperature
• Application: All Types of Batteries
• Customized: Customized
• Nominal Volume: 1000L
• Internal Dimensions: W1000*H1000*D1000mm
• External Dimensions: W1280*H2150*D2050mm
• Weight: Approximately 580kg
• Transport Package: Wooden Box
• Specification: W1280*H2150*D2050MM
• Trademark: SZBONAD
• Origin: China
• Production Capacity: 10 Pieces/Month

Product Description

IEC 62133 Battery Test Temperature Humidity Test Chamber China Manufacturer

The SZBONAD IEC 62133 Battery Test Temperature Humidity Test Chamber is engineered to rigorously validate battery safety and reliability under extreme environmental stress. Simulating temperatures from -70°C to +150°C and humidity levels of 20%–98% RH, it ensures precise performance testing for lithium-ion, Li-polymer, and next-gen batteries. Globally compliant and equipped with advanced safety protocols, this chamber is the benchmark for R&D labs, certification bodies, and new energy innovators.

Compliance Standards

Core Certifications:
    IEC 62133-1/2: Safety testing for portable batteries.
    UN 38.3: Transportation safety for lithium batteries.
    IEC 60068-2-2:2007: Environmental stress validation.
Global Compliance:
    UL, GB/T (China), JIS (Japan), and regional standards.

Key Applications

1. Lithium Battery Validation

    Thermal expansion, low-temp discharge, cycle life, and humidity degradation tests.
2. New Energy Solutions

    EV battery packs & energy storage systems (ESS) environmental adaptability.
3. Consumer Electronics

    Safety certification for smartphones, laptops, and wearables.
4. Quality & Certification Labs

    Third-party compliance (TÜV, UL, CE).

Product Highlights

Extreme Condition Simulation

    -70°C to +150°C with 20%–98% RH humidity control.

Lab-Grade Precision
    ±0.5°C temperature uniformity for repeatable results.

Safety-First Engineering
    Explosion-proof structure, over-temperature cutoff, and short-circuit alarms.

Smart Operation
    Touchscreen controller, 999 programmable cycles, and USB data export.

Eco-Efficient Design
    Energy-saving compressors & eco-friendly refrigerants reduce OPEX.

Why Choose BONAD?

As a globally trusted manufacturer, SZBONAD delivers precision-engineered test chambers that exceed IEC 62133 and UN38.3 requirements. Our chambers empower Tesla-tier EV innovators, top certification labs, and Fortune 500 electronics brands to eliminate battery risks—proactively.

Specification

Temperature Fluctuation	±0.5℃
Humidity Fluctuation	≤2.5%
Temperature Deviation	≤±2.0℃
Humidity Deviation	≤±3%
Heating Rate	-70℃to+150℃ ≥5℃/min (Average over the entire range)
Cooling Rate	+150℃to-70℃ ≥5℃/min (Average over the entire range)
Load Condition	None
Operating Noise	A-weighted sound level ≤70 dB(A)
	(Measurement taken in a soundproof room with minimal echo at an ambient temperature of 25℃.
	Using A-weighting, the average value is measured at 9 points.
	Each test point is 1 meter horizontally from the noise source and 1 meter above the ground.)
Thermal Insulation Structure	1.Outer wall material: A3 steel plate with spray coating.
	2.Inner wall material: Brushed stainless steel plate SUS#304.
	3.Thermal insulation material for the box body: 100mm high-temperature-resistant rigid polyurethane foam.
	4.Thermal insulation material for the door: 100mm high-temperature-resistant rigid polyurethane foam.
Bottom Structural Strength	The bottom of the test chamber is designed with track load-bearing capacity: ≤100kg/m² (load).
Air Conditioning Channel	1.Stainless steel long-shaft centrifugal fan: 2 units, 90W.
	2. Fan, heater, evaporator (also dehumidifier), drainage device, pressure balance port, adjustable air guide plate, temperature sensor.
Standard Configuration of the Test Chamber	1.Window: 400x600x40mm, 3 layers of vacuum tempered glass.
	2.Embedded flat handle.
	3.Door hinge: SUS #304 imported hinge.
	4.Internal energy-saving light: LED energy-saving light.
	5.Lead hole: φ50mm, 1 unit, located on the right side.
Door	1.Single door, opens outward, hinge on the left, handle on the right (when facing the front of the chamber).
	2.Equipped with a safety door lock mechanism (the door can be opened from inside the test chamber). The door is equipped with electric anti-condensation heating, and the hollow glass observation window has a viewing area of approximately (W400×H600mm). The door frame is equipped with anti-condensation electric heating.
Control Panel	Controller with 7-inch display, temperature (humidity) control display, operation indicator light, and lighting button.
Mechanical Room	Refrigeration unit, compressor water tray, pressure relief device, heating device.
Power Distribution Cabinet	Power distribution board, cooling fan, main power switch, transformer, intermediate relay, time relay, solid-state relay, AC contactor, circuit breaker.
Heater	1.High-quality custom heating wire set.
	2.Heating control mode: SSR (solid-state relay), non-contact periodic pulse width modulation.
	3.Heating power: approximately 4KW.
Power Line Hole	Located on the back of the chamber.