Customization: | Available |
---|---|
Installation Type: | Soil |
Sensing Type: | Resistive |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Technical parameter | |||
The signal output type | Output voltage 0-2V output impedance <1Kohm |
current output 4-20mA load resistance <500ohm |
RS485 interface, Modbus protocol |
Power supply voltage | 5-30V/DC | 12-30V/DC | 5-30V/DC |
Maximum power dissipation | 40mA@24V DC | 80mA@24V DC (When the two current output channel is 20mA) |
30mA@24V DC |
Soil moisture measurement area | The probe as the center, the diameter of 7cm, height of 7cm cylinder | ||
Response time (moisture and temperature) |
Less than 1 second | ||
Soil moisture measurement range | Optional range: 0-30% volumetric moisture content 0-50% volumetric moisture content 0-100% volumetric moisture content |
||
Soil moisture measurement accuracy |
0-53% range is ± 3%; 53-100% range is ± 5% |
||
Soil temperature measuring range |
-40~80ºC | ||
The measurement precision of soil temperature |
±0.5ºC | ||
Protection grade | IP68 | ||
Operating environment | -40~85ºC | ||
The storage environment | -40~85ºC | ||
The material of the probe | Food grade stainless steel | ||
Sealing material | The black flame retardant epoxy resin | ||
Installation | All buried or probe into all of the measured medium |
Series | Code 1 | Measurement parameters | |||||
MS10- | A B |
Soil volumetric water content (VWC) and temperature Soil volumetric water content (VWC) |
|||||
Code 2 | The range of volumetric water content of soil | ||||||
A B C |
0-100% 0-50% 0-30% |
||||||
Code 3 | Output signal | ||||||
A B C D E F G |
Output voltage 0-2V The current output of 4-20mA RS485 interface, Modbus protocol RS485 interface, Modbus protocol and the 0-2V output voltage RS485 interface, Modbus protocol and 4-20mA output current The SDI-12 interface Custom |
||||||
Type example: The MS10 series, the soil volumetric water content (VWC) and temperature, soil volumetric water content range of 0-100%, RS485 interface, Modbus protocol. The selection of the code as follows: |
|||||||
MS10- | A | A | C |