IPX1 and IPX2 waterproof fixed drip box test equipment
Dripping box test equipment is designed to meet the requirements of IEC 60529. The tester can accommodate one of three different size drip boxes - 500mm x 500mm, 700mm x 700mm, or 500mm x 1000mm. The flow rate of drips is set and monitored by a user friendly touch screen controller that sets the water pressure to the drip box. The drip box and the water system is fully enclosed and filtered to minimize clogging of any nozzles.
IPX1 AND IPX2
Drip Box : The drip box is for IPX1 and IPX2 drip test. The drip box size is 800x800x75mm (LxWxH). The diameter of drip hole is 0.4mm, distant of drip hole is 20mm, sample can be over 150kg
IPX1 Dripping water
Dripping water (vertically falling drops) shall have no harmful effect. Test duration: 10 minutes, equivalent to 1 mm rainfall per minute.
IPX2 Dripping water when tilted up to 15°
Vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle up to 15° from its normal position. Test duration: 10 minutes, Water equivalent to 3 mm rainfall per minute.
| Technical parameter: |
| No. |
Model |
BND-IPX12C-800 |
BND-IPX12C-1000 |
| 1 |
Drip area |
800*800mm |
1000*1000mm |
| 2 |
Outer size |
L1050×D1150×H2600 mm |
L1250*D1350*H2600mm |
| 3 |
Turntable diameter |
500 mm |
600 mm |
| 4 |
Dripping aperture |
0.4mm. |
| 5 |
Distance between holes |
20*20 mm |
| 6 |
Rainfall |
1-5mm/Min(±0.5mm/min) |
| 7 |
Flow adjustment mode |
Manual |
| 8 |
Drop box height |
1000*1800 adjustable |
| 9 |
Turntable bearing |
50KG |
| 10 |
Turntable speed |
1 r/min |
| 11 |
Turntable tilt |
0° or 15° |
| 12 |
Turntable lifting range |
Fixed type |
| 13 |
Testing time |
0-999 min |
| 14 |
protector |
Leakage, water short-circuit |
| 15 |
Power supply(V) |
220V |
| 16 |
Power (KW) |
1 |
| 17 |
Standard |
IEC60529:1989+A1:1999,GB4208,GB7000.(IPX1,IPX2) |
IPX3 AND IPX4
• Swing Pipe Water Spray Test Equipment : It is for IPX3 and IPX4 test, the semi-diameter of swing pipe is 1meter. IPX3 is 120degree and IPX4 is 180degree. The diameter of inside swing pipe is 0.4mm. The automatic sample rotating base diameter is 600mm and speed is 1~5rpm which controlled by PLC panel
IPX3 Spraying water
Water falling as a spray at any angle up to 60° from the vertical shall have no harmful effect. Test duration: 5 minutes, volume: 0.7 litres per minute, Pressure 80-100 kPa.
IPX4 Splashing of water
Water splashing against the enclosure from any direction shall have no harmful effect. Test duration: 5 minutes, volume: 10 litres per minute, Pressure 80-100 kPa
IPX5 AND IPX6
• Waterproof Jet Test Device : With water supply device size is 1000x1000x600mm, the bore diameter is ф6.3mm (IPX5) and ф12.5mm (IPX6). Diameter of hole is 6.3mm for IPX5 and 12.5mm for IPX6. The water speed is 12.5±0.626L/min for IPX55 and 100±5L/min for IPX6
IPX5 Water jets
Water projected by a nozzle (6.3 mm) against enclosure from any direction shall have no harmful effects. Test duration: at least 15 minutes, volume: 12.5 litres per minute, pressure 30 kPa at distance of 3 m.
IPX6 Powerful water jets
Water projected in powerful jets (12.5 mm nozzle) against the enclosure from any direction shall have no harmful effects. Test duration: at least 3 minutes, volume: 100 litres per minute, pressure 100 kPa at distance of 3 m.
IPX7
• Immersion tank Waterproof test Device : It is for IPX7 test. The top of the water tank size is 1000x1000x1200mm. The sample testing base is max 120kg. It includes two temperature channels meter and digital display.
IPX7 Immersion up to 1 m
Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time (up to 1 m of submersion). Test duration: 30 minutes, Immersion at depth of at most 1 m measured at bottom of device, and at least 15 cm measured at top of device.
IPX8
• Immersion tank Waterproof test Device : It is for IPX8 test. It can measure 0~50m water depth. The water immersion size is diameter is 600mm and height is 1200mm. The compressive stress is 10 atmospheric pressures or design customer request
IPX8 Immersion beyond 1 m
The equipment is suitable for continuous immersion in water under conditions which shall be specified by the manufacturer. Normally, this will mean that the equipment is hermetically sealeed. However, with certain types of equipment, it can mean that water can enter but only in such a manner that it produces no harmful effects. Test duration: continuous immersion in water, Depth specified by manufacturer, generally up to 3 m.
FAQ :
What about your quality?
Each equipment must be carry out 100% examination and test again before shipping
What is the MOQ ?
Most instruments support MOQ one set.
How long the delivery time ?
Generally most equipment will be 3-10days after we receive your payment or the order conformed ,please conform with us before you made an order .
What is the warranty of the products?
One year ,but we can provide you life long support .
What is the package?
Export standard Solid wooden case
What is the shipping way ?
We have stable forwarding agent for air and sea transportation ,and also express about DHL TNT etc , we will suggest you the best shipping way base on your requirement .
What is the payment term ?
T/T, Western Union,Money gram ,Paypal etc
Company Profile :Our Advantages :
Certifications :Factory Introduction :Plant Warehouse :Cooperative Customers & Brands:
Product Packaging :
Audited Supplier 
){kind=link}