| Warranty: | 1year |
|---|---|
| Type: | Needle Flame Test Apparatus |
| Maxcapacity: | <1000KN |
| Accuracy Grade: | 1 |
| Load Way: | Electronic Load |
| Loading Method: | Dynamic Load |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier IEC60695 Needle Flame Test Equipment for UL Thermoplastic Safety Test
1.Needle Flame Test apparatus meets IEC60695
2.Can measure kind of materials
According to IEC60695, Needle Flame Test apparatus is applied in the production and quality control department of lighting instrument, hypopiesis electrical apparatus, domestic appliance, machine electric appliance, electrical machine, power tool, electronic instrument, electrician instrument and technical equipment. Also, it is fit for the industry of insulation material, engineering plastics and solid combustible material.
Technical Parameters
| Model | BND-ZY Needle Flame Test Equipment |
Needle burner |
the hole Φ 0.5mm ± 0.1mm, outside diameter ≤ Φ 0.9mm, length ≥ 35mm, |
| Material | stainless steel |
| Burner angle | tilt 45 ° (test) or vertical (adjust the flame height) |
| Application time | 0-999 .9 s ± 0.1s adjustable (normally choose to 30s) |
| Burning duration | 0-999 .9 s ± 0.1s, auto record, manual suspension |
| Flame height | 12mm ± 1mm (with a height measurement apparatus) |
| Burn gas | 95% of the butane gas (Pressure:Less than 0.2MP) |
Temperature range |
0 ~ 1000 ºC |
| Flame temperature requirements | from 100 ºC ± 2 ºC 700 ºC ± 3 ºC rise to the time in 23.5 seconds ± 1 seconds |
| Thermocouple | Φ0.5mm (K type) |
| Test procedure | automatic control |
| Reference standard | IEC60695 -11-5-2004, GB/T5169.5-2008 |
| Inside dimension | 0.5 cubic meters, stainless steel chassis |
| Equipment dimensions | 1000mm wide × 650mm deep × 1300mm high |
| Power supply | AC220V ± 5%, 50Hz, 0.3KVA |
Installation and adjustment of the equipment
1: condition of Installation
a: the equipment should install in the table board and fume hoods,
b: Min. Size of the table board: Length 1400mm * Width 800mm * Height (600 to 800)mm
c: Boundary dimension: Length 1100mm * Width 700mm * Height 1300mm
d: the installation distance of the wall: >200mm will be better
e: Diameter of smoke vent: 100mm
f: Height of table-board keeps 600 to 800mm to convenience the operation
g: Independent test room with necessary exhaust system and fire protection equipment
h: Customer need to prepare the gas (Butane or purity above 95% Propane) and the hydrogen pressure reducing valve yourselves.
2: Adjustment
A: Leak test: check the gas circuit include Air source, Reducing Valve, whether the related adaptor is tightened
Close the Pressure Regulating Valve, and open the Gas Cylinder
Adjust the Hydrogen Pressure Reducing Valve smoothly, make the output pressure around 0.2MPa,
Adjust the control panel of " Pressure Regulating Valve" and make the pressure gage not exceed 0.1MPa/1kg.
Close the Gas cylinder, wait for 5 minutes, and check the of pressure's situation.
Company Profile :Our Advantages :
Certifications :Factory Introduction :Plant Warehouse :Cooperative Customers & Brands:
Customer Reviews :Product Packaging :
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}