Intrusion Protection Water Jet Horse Nozzle Spray Test Kits
1.Introduction:
IEC60035-5 IEC60529 iec water jet nozzle IPX5 and IPX6 call for a specimen to be sprayed with water from all practicable directions. IPX5 specifies a nozzle with a 6.3mm diameter opening and a flow of 12.5l/min. IPX6 specifies a nozzle with a 12.5mm diameter opening and a flow rate of 100L/min.
2.Applications:
The IEC60035-5 IEC60529 Jet Nozzle IPX5-6 Jet Nozzle consists of a jet handle that is equipped with a pressure gauge and an easy-to-adjust flow valve. The interchangeable nozzles assemble easily to the jet handle. The nozzles are made from stainless steel.
3.Test Condition:
1,The tests are conducted with fresh water.
2,During the tests for IPX1-IPX6 the water temperature should not differ by more than 5 K from the temperature of the specimen under test. If the water temperature is more than 5K below the temperature of the specimen a pressure balance shall be provided for the enclosure.
3,During the purpose of the tests ,the surface area of the enclosure is calculated with a tolerance of 10%.
4,Adequate safety precaution should be taken when testing the equipment in the energized condition.
4.Application :
Stainless steel nozzles
Valve for water flow regulation and shut off
Pressure gauge
Hose connector
Interchangeable nozzles
Standard :
IEC60529, 60598-1, 60335-1, EN60335-1, 60950,60529, GB4208,2423., 7000.1 GB/T4942.2, 4706.1
| Item |
IPX5 IPX6 |
| Model |
BND - BZ |
| IPX5 aperture |
6.3mm |
| IPX6 aperture |
12.5mm |
| IPX5 water flow rate |
12.5±0.625L/min |
| IPX6 water flow rate |
100±5L/min |
Product pictures :
| IPX-0 |
|
No special protection |
| |
| IPX-1 |
|
Protected against falling water Equivalent to 3-5mm rainfall per minute for a duration of 10 minutes. Unit is placed in its normal operating position. |
| |
| IPX-2 |
|
Protected against falling water when tilted up to 15 degrees - Same as IPX-1 but unit is tested in 4 fixed positions - tilted 15 degrees in each direction from normal operating position. |
| |
| IPX-3 |
|
Protected against spraying water - Water spraying up to 60 degrees from vertical at 10 liters/min at a pressure of 80-100kN/m2 for 5 min. |
| |
| IPX-4 |
|
Protected against splashing water - Same as IPX-3 but water is sprayed at all angles. |
| |
| IPX-5 |
|
Protected against water jets - Water projected at all angles through a 6.3mm nozzle at a flow rate of 12.5 liters/min at a pressure of 30kN/m2 for 3 minutes from a distance of 3 meters. |
| |
| IPX-6 |
|
Protected against heavy seas - Water projected at all angles through a 12.5mm nozzle at a flow rate of 100 liters/min at a pressure of 100kN/m2 for 3 minutes from a distance of 3 meters. |
| |
| IPX-7 |
|
Protected against water immersion - Immersion for 30 minutes at a depth of 1 meter. |
| |
| IPX-8 |
|
Protected against water submersion - The equipment is suitable for continual submersion in water under conditions which are identified by the manufacturer. |
Company Profile :Certifications :Factory Introduction :Plant Warehouse :Cooperative Customers & Brands:
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}