AS/NZS 3112 Australian Plug and Socket Gauge Testing Equipments

Product Description

AS/NZS 3112 Australian Plug and Socket Gauge Testing Equipments

1. Introduction:
Our company  offers a wide range of gauge to meet the most common standards including those from IEC, EN, UL, GBDIN, VDE and other similar international standards.
Such standards require the checking of size &  definition etc, these gauges are constructed from senior stainless steel and appropriate steel with a hardness  of at least 60HRC and a roughness according to standard require.

Australia plug  and socket gauge is strictly designed and manufactured according to the relevant standard requirements of AS/NZS 3112 figure A, B, C, D, E, F, G size, amount in 9pcs.
This plug and socket test gauge is mainly used to test and inspect whether the structure and size of plugs and sockets conform to AS/NZS 3112 standards. And the mainly application industries is electronics, electrical  appliances, plugs and sockets and other similar areas. 
Standard: AS/NZS3112, BS1363-2, VDE0620-1:2010-02, GB1002, GB1003 etc. 
 
2. Features:
(1) Gauge dimensions, tolerances, material, hardness, surface roughness conform to the standards requirements;
(2)Surface corrosion and abrasion resistance  can   resist normal contact corrosion and not embroidered  patch (the operator hand may exist in the sweat, the corrosion effect equivalent to NACL salt solution or  (3)NH4CL salt solution corrosion);
(4)Material hardness is more than 60HRC;
(5)Material thermal expansion coefficient is small, dimensions and tolerances is stable and reliable.
 

1	AS/NZS3112-Fig2.5	pressure test apparatus for insulation on insulated plug pins at high temperature
2	AS/NZS3112-Fig2.6	impact test apparatus for insulation on insulated plug pins at low temperature
3	AS/NZS3112-Fig2.9	Temperature rise testing box
4	AS/NZS3112-Fig2.10	Copper of temperature rise testing
5	AS/NZS3112-Fig2.8	Plug bending test device
6	AS/NZS3112-Fig3.1 a.b.c	gauge for depth of no-contact test
7	AS/NZS3112-Fig3.6	device for checking the resistance to lateral strain (three pin gauge)
8	AS/NZS3112-Fig3.7	device for checking the resistance to lateral strain (two pin gauge)
9	AS/NZS3112 figure A1	gauge for three-pin 250 v max flat-pin plugs
10	AS/NZS3112 figure B1	gauge for two-pin flat-pin 125 v max. plugs (with parallel pins)
11	AS/NZS3112 figure C1	Three-pin test plug with flat pins for full insertion test and the finger test during normal insertion test.
12	AS/NZS3112 figure D1	Three-pin test plug with flat pins for abnormal insertion test .
13	AS/NZS3112 figure F1	Plugs and socket-outlets for use in extra-low voltage circuits
14	AS/NZS3112 figure G1	Three-pin test plug with flat and round pins for the full-insertion test and test finger test during normal insertion test
15	AS/NZS3112-2.13.9.1	18N Australia plug testing device
16	Item 3.3.4.1	Test gauge of Minimum Pullout force
17	Item 2.3.2  /figure 2.3	No go gauge of socket aperture
18	Item 3.14.8.2/figure 2.1(a),(b),(c)	Plug of socket temperature rise testing
19	Item 2.8.1	Test pin of distance testing gauge

3.Product Pictures :